Ph-line
PH-750 | Blow Molding Machine for Pharma
The PH-750 Extrusion Blow Molding Machine is specifically designed for the production of bottles for the pharmaceutical sector with medium production volumes. It supports containers from 100 ml to 2 L, with monolayer and multilayer configurations up to COEX-6.
Stroke 750 mm | Bottle Size 100 ml / 2L
Cavities 4-20 | Clamping Force 280kN
Download Datasheet
Examples of PH2-750 model productivity
Number of cavities 10
Hourly and daily production
PH2-750 | 7.130 bph – 171.120 bpd
Number of cavities 9
Hourly and daily production
PH2-750 | 6.060 bph – 145.440 bpd
Number of cavities 7
Hourly and daily production
PH2-750 | 4.585 bph – 110.040 bpd
Download Datasheet
Advantages of the PH-750 machine
Easier cleaning thanks to the use of specific materials and smooth external surfaces, complemented by a special coating resistant to aggressive detergents.
A model designed and developed specifically for the pharmaceutical sector, compliant with its strict regulations.
The PH2-750 model is available in aseptic or Ultra-Clean blowing versions, built with stainless steel and PTFE piping.
Designed for the pharmaceutical industry.
It is ideal for the production of containers for the pharmaceutical sector. It can blow bottles ranging from 100 ml to 2 liters.
The PH-750 electric Blow Molding Machine can extrude and blow various plastic materials, including LDPE, HMWPE, HDPE, PP, in monolayer or multilayer configurations (up to COEX-6) depending on the customer’s production requirements.
Download Datasheet
Explore all the PH-750 features
Robust and stable base with perimeter frame
The machine is equipped with a solid and stable base and a perimeter frame that ensure high structural strength, reliability, and maximum operational safety.
Aspiration system
Properly captures the residual dust generated during the production cycle, using:
a) independent control panel
b) extraction fan
c) central hood
d) two lateral laminar flow hoods in the product picking and depositing area.
Easily accessible PLC modules
The PLC modules are accessible from both sides of the machine, allowing diagnostic operations without stopping production.
Separate machine cooling circuit
Dedicated circuit with a separate line for machine cooling, if required.
Safe access
The absence of belts at the front of the machine ensures easy and safe access for format change operations.
Flat design and specialized coating
The machine’s design and dedicated coating are engineered to ensure long-lasting durability, even when exposed to aggressive cleaning agents, providing effective and safe machine cleaning.
Safety and full visibility
Strong and safe doors with full-height visibility to provide the operator with complete visual control of the machine during production.
Rear-positioned flash conveyor belt
Ensures clean flash collection, free from water, grease, or dirt, reducing contamination of the regrind material.
Extruder gearbox oil draining
Allows simple and clean draining of used oil from the various gearboxes.
Electric platform adjustment
Enables left/right and up/down position adjustment even while the machine is in production.
High water flow rate
Ensures a high water flow rate for efficient mold cooling.
Ultraclean blowing filters
The Ultraclean blowing system consists of aseptic filters (particulate, coalescing, activated carbon) that prevent compressed air from contaminating the bottles during the forming phase.
Single exit for both stations
A single exit for both stations, without a double conveyor, configurable on the right or left side.
Integrated electrical panels
Integrated electrical panels on both sides ensure proper spacing in compliance with CE regulations and effective cooling of electronic components.
Available technologies
Multilayer technology for improved product preservation and sustainability.
