Tk-line
TK-750L | EBM Machine for Jerrycans up to 30L
The TK-750L Extrusion Blow Molding machine is specifically developed for the production of large plastic containers and jerrycans for the industrial sector. It can produce sizes from 10 to 30 liters, with single-layer and multi-layer configuration up to COEX-4.
Stroke 750 mm | Bottle Size 10L / 30L
Cavities 1-2 / 2-4 | Clamping Force 350kN
Download Datasheet
TK-750L. Designed for plastic jerrycans up to 30L.
The TK-750L model of the TK-Line series is designed for the production of plastic cans for applications such as lubricants, chemicals, and agrochemicals. It differs from the standard TK-750 model in the height of the mold carrier plate (+70 mm) and the enlarged carriage opening (+160 mm), which allows production of cans up to 30L instead of 20L.
This continuous extrusion blow molding machine is available in both single (TK1-750L) and double carriage (TK2-750L) configurations and is ideal for:
- replacing obsolete machinery
- increasing production capacity
- integrating a new line for can production
Download Datasheet
Examples of TK-750 model productivity
Number of cavities 2
Hourly and daily production
TK1-750L | 300 bph – 7.200 bpd
TK2-750L | 600 bph – 14.400 bpd
Number of cavities 1
Hourly and daily production
TK1-750L | 115 bph – 2.760 bpd
TK2-750L | 230 bph – 5.520 bpd
Number of cavities 1
Hourly and daily production
TK1-750L | 115 bph – 2.760 bpd
TK2-750L | 230 bph – 5.520 bpd
Number of cavities 1
Hourly and daily production
TK1-750L | 95 bph – 2.280 bpd
TK2-750L | 190 bph – 4.560 bpd
Download Datasheet
Advantages of the TK-750L EBM machine
Compact solution for can production, with an optimized footprint of only 4 × 8.3 m.
High productivity ensured by process optimization systems and post-cooling stations.
Integration with inline quality control systems, including handle raw material inspection, weight, and leak testing, with data collection and full management via HMI.
Designed for the industrial sector.
It is ideal for the production of large-format cans for applications such as lubricants, chemicals, and agrochemicals. It can blow containers ranging from 10 to 30 liters. For the production of smaller cans with capacities from 4 to 20 liters, the TK-750 version is available.
The TK-750L Extrusion Blow Molding machine can extrude and blow various plastic materials; the most common are HMWPE and HDPE, both monolayer and multilayer (up to COEX-4), depending on the customer’s production requirements.
Download Datasheet
Explore all the TK-750L features
Robust and stable base with perimeter frame
The machine is equipped with a solid and stable base and a perimeter frame that ensure high structural strength, reliability, and maximum operational safety.
Easily accessible PLC modules
The PLC modules are accessible from both sides of the machine, allowing diagnostic operations without stopping production.
Separate machine cooling circuit
Dedicated circuit with a separate line for machine cooling, if required.
Safe access
The absence of belts at the front of the machine ensures easy and safe access for format change operations.
Safety and full visibility
Strong and safe doors with full-height visibility to provide the operator with complete visual control of the machine during production.
Extruder gearbox oil draining
Allows simple and clean draining of used oil from the various gearboxes.
Electric platform adjustment
Enables left/right and up/down position adjustment even while the machine is in production.
Rear-positioned flash conveyor belt
Ensures clean flash collection, free from water, grease, or dirt, reducing contamination of the regrind material.
High water flow rate
Ensures a high water flow rate for efficient mold cooling.
Single exit for both stations
A single exit for both stations, without a double conveyor, configurable on the right or left side.
Integrated electrical panels
Integrated electrical panels on both sides ensure proper spacing in compliance with CE regulations and effective cooling of electronic components.
Available technologies
Multilayer technology for improved product preservation and sustainability.
