E-line
E-1000 | Large Blow Molding Machine
The E-1000 large Extrusion Blow Molding machine is ideal for plastic bottle and container manufacturers who require high production volumes. It supports containers from 100 ml to 5 liters, with monolayer and multilayer configurations up to COEX-6.
Stroke 1000 mm | Bottle Size 100 ml / 5L
Cavities 4-28 | Clamping Force 280kN / 500kN
Download Datasheet
Examples of E-1000 model productivity
Number of cavities 14
Hourly and daily production
E2-1000 | 9.600 bph – 230.400 bpd
Number of cavities 7
Hourly and daily production
E2-1000 | 3.790 bph – 90.960 bpd
Number of cavities 7
Hourly and daily production
E2-1000 | 5.385 bph – 129.240 bpd
Number of cavities 5
Hourly and daily production
E2-1000 | 2.420 bph – 58.080 bpd
Number of cavities 4
Hourly and daily production
E2-1000 | 1.570 bph – 37.680 bpd
Download Datasheet
Advantages of the E-1000 blow molding machine
The 1-meter stroke allows configuring the machine with a high number of cavities, even for large bottles, unlike smaller machine models.
Excellent balance between high productivity and investment, with a rapid financial return.
It is possible to install a 500 kN clamping unit, whose force can be optimized using the CFA system.
Perfect for many applications.
The E-1000 is ideal for producing packaging for the Food and Dairy, Personal Care, Detergent, Chemical, Lubricant, and Freeze Board sectors. It can blow containers ranging from 100 ml to 5 liters. Unlike smaller models, the 1000 mm stroke can support 4 to 28 cavities.
The E-1000 Full Electric Blow Molding machine can process various plastic materials, including LDPE, HMWPE, HDPE, PP, in monolayer or multilayer configurations (up to COEX-6) depending on customer production needs.
Download Datasheet
Applications
Explore all the E-1000 features
Robust and stable base with perimeter frame
The machine is equipped with a solid and stable base and a perimeter frame that ensure high structural strength, reliability, and maximum operational safety.
Easily accessible PLC modules
The PLC modules are accessible from both sides of the machine, allowing diagnostic operations without stopping production.
Extruder gearbox oil draining
Allows simple and clean draining of used oil from the various gearboxes.
Safe access
The absence of belts at the front of the machine ensures easy and safe access for format change operations.
Safety and full visibility
Strong and safe doors with full-height visibility to provide the operator with complete visual control of the machine during production.
Rear-positioned flash conveyor belt
Ensures clean flash collection, free from water, grease, or dirt, reducing contamination of the regrind material.
Single exit for both stations
A single exit for both stations, without a double conveyor, configurable on the right or left side.
Electric platform adjustment
Enables left/right and up/down position adjustment even while the machine is in production.
High water flow rate
Ensures a high water flow rate for efficient mold cooling.
Separate machine cooling circuit
Dedicated circuit with a separate line for machine cooling, if required.
Integrated electrical panels
Integrated electrical panels on both sides ensure proper spacing in compliance with CE regulations and effective cooling of electronic components.
Available technologies
Multilayer technology for improved product preservation and sustainability.
